 Home ? Products ? Dry-type Transformer |
| Dry-type Transformer |
| Product structure and manufacturing technique of epoxy-cast dry-type transformer |
 |
| 1. Iron core: |
 GEORGE auto shear(made in Germany,with two modes:GEORGE 400&GEORGE 600) is adopted to cut the silicon-steel sheets which make up the iron core.The burr of silicon-steel sheet is less than 0.02mm and the angle error is less than±0.005.Fine quality and high magnetic inductivity silicon-steel sheets,which are made in Japan,are applied to reduce the no-load power consumption and noise.In the inner space of iron core,there are H-insulated oil-lines.Double H-glue,which possesses strong stickability,is applied on the iron core to grarantee a reliable performance and a long service life.The iron core adopts five-stage stepping joint.so the champ force is adjustable.The precise positioning guarantees the horizontal and vertical directions.Elastic bearing assembly is adopted between coils (high voltage coil and low voltage coil) and iron core and a stable pressure caused by a dish spring is applied.So the device possesses a high cushioning abilty and a high shock resistance. |
| 2. Coil: |
| The high voltage coils are sectional cylinder coils.Thin insulation airtight vacuum casting is conducted.In the winding(large capacity),there is an axial air duct.The coils can withstand a high voltage and seldom cause partial-discharge.The coils have high fire-resistance,damp-proof ability.overload ability,dust-proof ability and fine cooling system.The low voltage coils are copper foil coils.Solidify the casting by applying DMD Pre-impregnaged heat distribution method.The processing property is nice,the efficiency is high,the additional consumption is low and the short-circuit resistance is high. |
| 3. Thin insulation layer: |
 Both the high voltage winding and low voltage winding are enclosed by film resin which is reinforced by compound silicon-hydride glass-fiber(can withstand a temperature of 200℃) and which possesses high withstand voltage abilty.The glass-fiber greatly reinforces the mechanical strength of the enclosure layer of resin.The resin layer is tenacious,thin and elastic,so it can expand or shrink with the winding.This can prevent the casting layer from splitting.Because the resin layer is very thin.So the temperature difference between the two sides of resin layer is very small.This helps the heat radiating of winding.In addition,axial air duct can be set in the inner space of winding to increase the radiating surface. |
| 4. Casting: |
| The finished coils are processed in the VACUUMPEK3/150E(HEDRICH CO,LTD.Germany) vacuum casting pot and the casting process is controlled by computer.Cibasc-F epoxy resin(Swiss).solidified agent and glass-fiber are applied to reinforce the casting coils.The thermal expansion coefficient of epoxy resin is as same as that of coil conducting body.The mechanical strength of resin layer is reinforced.Exclude the air in the liquid epoxy resin with the film degassing method,which makes sure that there is no cavity in the casting coils.This can guarantee a low partial-discharging(=5pc) or zero partial-discharging for the transformer. |
| 5. Casting: |
| 国产精品爽爽久久久久久 |
| 6. Quality and testing: |
国产午夜视频在线观看
· Local testing items: No local testing items,all testing items should be conducted out of the company:GB1094.1-1996
· Type approval test:A:temperature rise test:GB1094.2-1996;B:lightning stroke test:GB1094.10-2003
· Special test:A:partial-discharging measurement:GB1094.3-1996;B:sound level measurement:GB1094.3-2003
· Other special tests:A:ratio interference test;B:partial-discharging positioning measurement;C:excitation characteristic curve;D:no-load current harmonic wave measurement. |
| 7. Technical support and service: |
| 亚洲一区二区三区四区 |
| 8. Casting: |
| Epoxy resin casting dry-type transformer is a environment protecting electrical device.The manufacturing process,operating process and the disposal process are all measure up to the ISO14001 and other standars(laws)that related to environment protection.The expired transformer can be disassembled.The recovery ratio can reach 90%.Sophisticated technique and devices are available for separating the conduting body and resin-insulated materials in the coils.The resin-insulated materials can be applied for comprehensive use,or be used for generating electricity by burning,or be disposed by burying. |
| 9. Casting: |
| We promise to fulfill the sustainable development.And we successfully passed the authentication by ISO14000(environment)and ISO18000(quality,environment and safety).Based on IEC and European Standard(ES)HD464,we conduct experiments about the heat shock resistance(C0,C1,C2),adaptabilty of environment(E0,E1,E2) and fire-resistance(F0,F1,F2).We have already achieved some successes and we will continue our pursuing. | | |
Carlisle Catalog
Want to read the catalog offline? Download the catalog!
By category:
All downloads are Acrobat Reader PDF files. If you don't have Acrobat Reader installed you can donwload it for free. Click on the button below to download and install.
You can also order the paper version of the catalog.
|
|
 |
| Sanbian Sci-Tech Co., Ltd. |
·Street Address: No.369 Western Boulevard, Haiyou Town, Sanmen County, Zhejiang Province, China
·Tel: 86-0576-89319292
·Fax: 86-0576-89319932 |
|
|
|
